Savity 1

 How to use

-Prepare the surface to be lined so that it is clean and free of dust, oils and previous layers of paint

Dry and porous surfaces are sprayed with pure water, except for

the surface of gypsum boards

-The contents of a ceramic adhesive package (20 kg) are mixed with 7-0 liters of pure water and stirred well until the mixture becomes cohesive,

-Leave the mixture for 15 minutes until the adhesive materials dissolve, then stir again before use

The mixture must be used within two hours of mixing The mixture is spread homogeneously using the designated administration on an area that can be tiled within 10 minutes The tile is pressed firmly against the surface and then immediately fixed in place

- Tile position can be repositioned within 15 minutes of Installation

-The mixing should not exceed more than half the thickness of the slab at the joints

-To choose the adhesion strength, remove the tiles after installation and make sure that two-thirds of the area of the back

-The product should be stored in a dry and shaded place